Parts needed to connect:
-Telect 2” Coupler p/n 027-2000-4299
-Telect 2” CableLinks to Trough Adapter p/n 027-1000-4207
-ADC 2x2 Junction p/n FGS-MJWR-C
In order to connect from the Telect WaveTrax system to the exit part of the ADC FiberGuide system, the Telect 2” coupler must be attached to the Telect 2” WaveTrax Part. Then attach the Telect 2” CableLinks to Trough adapter to the coupler. The ADC 2x2 junction can connect to the other end of the CableLinks to Trough adapter. Finally Connect the ADC 2x2 Junction to the ADC 2” FiberGuide part to complete the process.
