get your answers here.

If you see this, leave this form field blank and support CSS.
Reset Search



Telect IOE Enclosure Alarm: Multiple Rectifier Failure

« Go Back


The Multiple Rectifier Failure alarm is caused when more than 1 rectifier is turned off, has failed, not seated properly into the shelf, or has been removed from the shelf. 

When this alarm is activated the system may be running off of the batteries, if the remaining rectifiers cannot supply the necessary load requirement.  Verify that all of the rectifier breakers are in the “On” position, and all the rectifiers are communicating with the controller and do not have a red led illuminated.  Try to re-seat any rectifier that has a red led illuminated, or replace it with a known good rectifier. 



Was this article helpful?



Please tell us how we can make this article more useful. For a response from Telect Support, please include an Email with your feedback.

Characters Remaining: 255